How To update Firmware | Configuration
Updated
As of 2/1/24 Rhino ROV system is end of life and is no longer serviceable. Reach out to support for our heavily discounted upgrade options.
How to update firmware
- Select the "i" at the bottom right corner of the main screen
- Select Update ROV Firmware
- Select Continue
- Updates may take several minutes. You will be notified when the update is complete. Select Ok, power the unit on, and begin use.
Configuration
If the carriage on the slider doesn't seem to recognize end of the rail or only moving half way down the rail, you may need to reconfigure the unit.
- Select the "i" at the bottom right corner of the main screen
- Select Configure ROV
- Select the slider model you are using
- Confirm slider model
- Configuration will begin and power button on the unit will illuminate blue
