Rhino Focus

Rhino Focus is an electronic follow focus that works with Rhino Arc II.  It allows you to capture more dynamic shots with perfectly executed focus pulls. It enables you to keyframe your focus when using Arc II on a slider or a tripod.

What's In The Box?
- Rhino Focus
- Focus Motor Cable
- Focus Lens Gear
7 oz (28g)
7" x 4" x 2" (18 cm x 10 cm x 5 cm)
Works with most cine lenses, but will not work with Fly-by-wire lenses

*For long lenses, the focus gear may not be long enough to reach the focus ring on the lens. We recommend measuring the distance between the body of the camera and the focus ring on the lens to confirm compatibility. 6"-7" or less should work fine.

*Panasonic GH4: Due to the hand grip on this model, focus may not be able to line up with certain short lenses (see below for reference). Our recommendation is to use a camera riser or grip to elevate the camera allowing the focus unit to go lower than the camera body and connect that way, or look for camera adapter which will push the lens out a little further. Here is a link for examples. Note: You'll need to find an adapter specifically for your camera model and lens, if there is one.

How did we do?

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)