Is your focus module not able to be tightened on your Arc II? Below are a couple options on how to tighten the lever.
- Using a small 5/32 Allen wrench, you can fit it under the tilt lever and tighten the bolt until the focus stays in place.
- If the Allen wrench you have won't fit (it is a small space) - you'll need to remove the tilt arm using a T20 Torx driver to remove the bolts on the tilt arm, then adjust the tilt lever bolt.
If you're experiencing another issue with focus such as binding, abnormal noise, or keeping an object in focus, please reach out to email@example.com and we can assist you.