Tightening the Belt

As of 2/1/24 Rhino ROV system is end of life and is no longer serviceable. Reach out to support for our heavily discounted upgrade options.

Did your belt disconnect from the slider's carriage? See below for possible solutions.

  1. If you still have the clamp and screw that attaches to the belt (It may still be connected to the carriage, you'll need a light to see) you can use a T6 driver to remove the screw/clamp, slide the belt back into the clamp and tighten that back into the carriage.
  2. If this doesn't work or you don't feel comfortable - reach out to us and we can get the slider in for service.

Reach out to support@rhinocg.com for further assistance

How did we do?

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)